Designed specifically for use with the
following series of Halsey Taylor water coolers:
HAC, HACBL, WM**, SCWT** series, S series
and WMBL. Can also be used on OVLSER,
OVLER, HRF, RC & BFMR units but must be
mounted into the wall behind the unit's
backplate. CANNOT be used in the HTV, SW,
WC, HBW or the unrefrigerated versions of the
HRF and OVL series.
**For water cooled models contact the factory.
RECOMMENDED USE CONDITIONS
Capacity......................1,500 Gallons (5678 £)
Flow rate.....................0.75gpm (2.8 l/m)
Temperature................40-120°F (4 - 49°C)
Maximum Pressure.....105psi (724 Kpa)
Minimum Pressure......20psi (138 Kpa)
PERFORMANCE TEST CONDITIONS*
Capacity......................1,500 Gallons (5678 £)
Flow rate.....................0.75gpm (2.8 l/m)
Pressure......................60psi (4.2 Kg/cm2)
Temperature................68-70°F (20-21°C)
*Performance will vary depending on local water conditions.
WATER CONNECTION
- Water Inlet for 3/8" O.D. Tube
- Water Outlet for 1/4" O.D. Tube

KIT -WATER FILTER (LEAD)
WaterSentry VII Retrofit Filter Kit for unfiltered Halsey Taylor drinking solution products (Coolers + Fountains).  
Filter should be replaced every 1,500 gallons or 1 year after installation. 
Equipped with Quick-Disconnect, 1/4 turn installation, as well as automatic inlet shut-off valve that closes when filter is removed.  
Designed to reduce lead, particles and chlorine. Also reduces odors and discoloration from incoming water. 
Spun Polypropylene prefilter mesh to prevent large, coarse sediment and particles from entering and clogging filter media.   Filter is certified to NSF 42 and 53 for lead, particulate class 1, chlorine, taste and odor reduction.

Order 55897C as replacement filter.
 

Items Related to This Product: 55897C - WaterSentry VII Replacement Filter